Shoot Report – Spirit of Sherwood – December 2015

Spirit of Sherwood Wooden Arrow shoot

Spirit of Sherwood Wooden Arrow shoot

So last shoot of the year and our thanks to all at Spirit of Sherwood for making it a good one.  They hosted a wooden arrow only shoot which unsurprisingly was well attended with an excess of 100 archers. Spirit ground is a long drive for us and knowing they wanted an early start along with the weather not looking great  we decided to stop over in Worksop the night before. For those overseas readers, parts of the UK have been battered by high winds and heavy rain resulting in serious flooding in Cumbria and southern Scotland, with the rest of the country experiencing high winds.
As it was the choice of motel was good as it was a 10 minute drive to spirits grounds and an easy walk to a local bar for an evening meal on Saturday.
3D baboon in the morning sun light

3D baboon in the morning sun light

So Sunday morning saw us packing up and heading down the road to Spirit. As I’ve said the shoot would be wooden arrow only meaning reduced number of classes, with there being Longbow, Amerian Flatbow, Hunting tackle and Primitive, all shooting wooden arrows with feather fletchings and no sights. Here is a link to last years shoot report.

It would be a 36 target course with a majority of 3d targets and only a few paper faces.
3d beaver complete with sawdust

3d beaver complete with sawdust

Our group would include Jackie and Charlie from Castle Bowmen both shooting hunting tackle. This would be the first time Sharon would be shooting her new Blackbrook American flatbow at a shoot, though she had had a little practise down at the club woods.

Sharon Shooting off the tree stump at 3d

Sharon Shooting off the tree stump at 3d

The course included one moving target a festive 3d turkey along with a predator prey.
Throughout the course Spirit had distributed boxes of sweets as festive treats for archers to help themselves,  a very kind and generous touch.

Spirit of Sherwood gift to archers

Spirit of Sherwood gift to archers

The shoot flowed well with no hold ups or apparent problems with the whole thing being completed by 3 pm allowing for all to set off home while there was still light.

3D bedded dear

3D bedded dear

There were some nice new 3d targets I hadn’t seen before including a 3D boar and bear.

Nice 3D bear target I hadn't seen before

Nice 3D bear target I hadn’t seen before

3D Boar hidden behind the tree

3D Boar hidden behind the tree

Being a  pretty flat ground spirit made use of a couple of tree stumps for elevated shots along with a few nicely framed shots between trees including one of a climbing cat 3d I’d not seen before.

Shooting off the tree stump at 3d

Shooting off the tree stump at 3d

3D car climbing the tree

3D car climbing the tree

Overall it was a really relaxed enjoyable shoot with good company and great atmosphere. There we no stretched targets just well set course at sensible distances, well done guys. We were lucky with the weather too as it was mostly dry except for the briefest of showers.  It was nice to chat with friends and fellow stick throwers along with other Fellowship of the Bow Facebook group members.
Sharon shot well and she came away with first in ladies American flatbow sadly I only managed third missing out on first by 8 points.
Thanks for reading and have a safe and enjoyable festive season.

Dixie Leathercraft

Equipment review – custom archery tabs from Dixie Leathercraft

Dixie Leathercraft

Dixie Leathercraft

Dixie Leathercraft is a small business in Leicestershire making a vast array of leather goods.
I first encountered them at the 3d championships this year where they had a large tent selling all kinds of products from quivers to arm braces, pouches to six gun holsters. I ventured into this Aladdins cave looking for a suitable belt pouch to house my Ventolin inhaler. They didn’t have one on show but offered to make me a custom belt pouch for the next day. Which they did and I have used ever since.
A few weeks after the championships a friend was round trying out his new Blackbrook afb and showed me a tab he had commissioned from Dixie. This got me thinking and I contacted Dixie to see if they would be able to make something similar for me.
They produced a couple of designs based on my specifications, one single layer and one double. The double was made large enough for me to mount  an old finger spacer from a worn out tab on.

This is the single thickness tab

This is the single thickness tab

The first design of the double layer worked okay but I felt it needed a slightly larger backing piece to extend to match the facing piece.

Mark 1 tab - needed the backing piece extended

Mark 1 tab – needed the backing piece extended

We also extended the leather covering the forefinger slightly.

Mark 2 tab before having spacer fitted

Mark 2 tab before having spacer fitted

The mark two was produced and I have now used this in earnest shooting the club 40 target course, on practice bosses at home and for a couple of shoots.
The extra length protects the ring finger well and the second layer whilst offering additional protection to the fingers, still allows me to feel the string on my fingers when at anchor.
I know a lot of people may think what’s wrong with the normal ones in the shops and my answer is nothing. I used one for several years along with shooting gloves and there are countless ones on the market. The reason I sought out a custom design was to see if it made a difference to me and I believe it does.
The tab is more comfortable to use than a glove  as I have found the glove in warm weather to be very warm and uncomfortable,  making my hand sweat.  I’ve taken to talc in the inside to make it more comfortable. I also tend to take my glove off between shots on warm days.
The cost has been cheaper than I expected and the service has been fabulous. Dixie Leathercraft are really friendly and helpful. I shoot split fingers or mediterranean lose meaning my first finger is above the arrow nock with the other two below the arrow. For this reason when I’m using a tab I have a finger spacer between the first and middle finger.
Mounting the finger spacer was pretty easy. I used my old tab as a guide initially marking the reverse side of the leather where the tab spacer would be.

Mark 1 below the mark 2. You can see how the backing piece now covers the full tab

Mark 1 below the mark 2. You can see how the backing piece now covers the full tab

The spacer on old tab was attached via two small screws which were easily removed from the worn out tab. I made two small holes in the new tab with a braddle for the screws and a third to allow the elastic strap through. If you have one you might want to use a leather hole punch for the elastic hole as it would make it easier to feed the elastic through.
Close up of the securing screws, the elastic is knotted through a hole in the metal plate

Close up of the securing screws, the elastic is knotted through a hole in the metal plate

The old tab had a metal plate triangular in shape with two holes in one end for the screws and the third I threaded the elastic through tying a knot so it wouldn’t be pulled through.
Once the elastic was fed through the tab I then fed the elastic through the gap between the two screws, screwing them tightly to the spacer then secured the elastic in place.
Elastic threaded through between the 2 screws before they are tightened

Elastic threaded through between the 2 screws before they are tightened

Before securing them I made sure the loop of elastic was the right size to accommodate my middle finger.

Shows the spacer and elastic loop on finger

Shows the spacer and elastic loop on finger

Finished leather tab

Finished leather tab

The extra length of leather can be easily folded over the metal plate .

Finished leather tab showing how the leather can be folded over

Finished leather tab showing how the leather can be folded over

I hope people find this of use . I know there have been a few articles and posts on tabs versus gloves. I think Bow International magazine ran an article on custom tabs and spacers a few issues back.
Thanks for reading.