Equipment Review – Timber Creek Wooden arrows

Timber Creek Arrows

Timber Creek Arrows

I recently picked up some Timber Creek wood arrows from Merlin Archery care of Jim Grizzly Kent  and thought it worth putting a review together.
First impressions are positive.
The shafts are 11/32 with a 4 inch feather shield fletchings and black nocks. Made from Siberian spruce, these were spined as 50/55 as I wanted to use them with my flatbow.
The varnish finish is good being smooth and flawless over the entire length of the arrow.
Only thing I don’t like is the nock colour. Whilst they look great, fit well on the string, they are black which makes them very hard to see on longer targets. I like the thread binding at the front of the fletching as this can protect the tip of the fletching.
The shafts are straight and with the clear varnish you can see the quality of the wood grain.
Close up

Close up of fletching and nock

Having weighed them the six arrows come in 30 grains variance which is pretty impressive for unmatched out of box.
The piles are 100 grain field point which will be fine for most but I prefer an 80 grain.

100 grain piles

100 grain piles

Out of the box they are 32 inches in length and come pre – piled and ready to shoot.  Only thing I’ve noticed is the piles on two are very slightly proud of shafts, probably due to the shafts being slightly less than an 11/32. So if shooting a bag boss they can snag on the fabric. In fairness this is not an uncommon problem with wooden shafts and one I’ve encountered when making my own.Initial goes
I’ve tried shooting them at full length and they fly ok at about 12 -15 yards but really need to cut them down to my draw length. At 20-25 yards I was noticing the difference of pile weight and length. My normal arrows are fitted 80grain points so will probably fit 80 grain piles for true comparison.

Further testing 
Having now cut them to my draw length and fitted 80grain points I can add a couple of extra observations.
Being spruce the wood feathers or crumbles a little when tapering them. I found the same with other spruce and to be fair these were better quality.
Removing the old piles was easy using a gas ring to heat them for about 10 seconds and then unscrewing with a pair of pliers. Not sure if the 100 grain field point will blunt if a wayward arrow were to hit a rock, but this is the same for other pile designs and the reason I prefer steel to brass.
Having shot them they fly very slightly high and to the left but only slightly which makes me think slightly stiff.

Grouping at 15 yards

Grouping at 15 yards

Flight wise, they are very good and I’ve shot them a couple of hundred times.
I’ve not missed so badly as to bounce them off a tree yet so not sure of durability but am sure I will find out soon.

UPDATE – First casualty and note to self. If you shoot your own arrow it breaks. Managed to shoot the pile off one.  Yes pile, not nockthat takes skills.

First casulaty

First casulaty of the testing

 Those interested in the Timber Creek range of bows might like to know i recently picked up a Timber Creek Cobra and hope to write a review in the near future.
 If you don’t have the time or expertise to make your own arrows I think they are a good buy being good quality components assembled well. Priced at just under £5 each it’s not bad value. (http://www.merlinarchery.co.uk/timer-creek-wooden-arrows-basic.html)

Overall a 8.5 to 9/10 due to the nock colour.

Thanks for reading

Making and doing archery madness

I firmly believe that a successful club is more than just a field or wood and group of people who shoot there.
A good club supports its members, nurturing and developing their skills and interests. I believe it should also be somewhat of a social gathering.

It is very easy for a newbie archer to get lost and confused with friendly offers of advice or to be too nervous or embarrassed to ask for help. Ideally you want new members to be intimidated as little as possible but not everyone has the confidence to ask questions or seek advice.

Learn from the past
Many years ago, I was a member of the Black Arrow club in Derby. In fact it was the  first ever archery club we joined. Kevin the club chairman and Cherrie the Secretary organised a making and doing session for all the new members who had joined. It gave all present the opportunity to learn the basics of arrow making, string making and how to serve strings. It proved a great success being both instructional and social with Cherrie and Pete (her partner) providing food for all.
Over the Christmas holiday of 2014 Sharon and I organised a similar event at our house, with the objective of giving a few of the newbies some guidance on making or repairing arrows and a variety of other topics.
It proved to be a very sociable afternoon  and evening, helped by the contributions of everyone who came and Sharon’s expert cooking. Yes, not only is she a cracking shot but also a great cook.

Nigel showing his expertise on straightening wooden arrows.

Nigel showing his expertise on straightening wooden arrows.

We covered topics of how to make wooden arrows including fletching arrows, attaching piles and nocks. Having a number of experienced archers there proved really useful as each explained how their technique was slightly different from each other enabling a great spectrum of knowledge to be displayed and discussed.  The discussion on whether to varnish the arrow prior to fletching or fletch then varnish was one hotly debated topic. An equally debated topic was the merits of different glues for attaching piles to wooden shafts with some preferring  hot melt over epoxy glues. All the advice and comments were provided freely and in a relaxed atmosphere.

Jason showing how to use fletching tape

Jason showing how to use fletching tape

Whilst arrow making was going on in one room, arrow straightening of aluminium arrows using our straightening jig was being demonstrated in another. There was also just enough space to demonstrate applying serving to a bow string.

Discussions went on long into the night on different techniques and it was a very sociable evening. Our thanks to all who contributed their time and advice.

Greta making her first arrows

Greta making her first arrows

With everyone at the wood the following day even more discussions took place, this time with archers showing off their arrows they had made previously and again citing the merits of varnishing first or other such topics.

So if you have the opportunity to run something similar to this at your club go for it. It doesn’t take much planning and benefits can be huge.

Thanks for reading and to all those that attended. Special thanks to Kevin and Cherrie who set the bar so high all those years ago.
Oh, Kevin if you are reading this remember the glue.