Tag Archives: bow

Sep 24 2015

Shoot Report – Centaura Bowmen – September 2015

Archers gathering

Archers gathering for the shoot at Centaura Bowmen

Sorry guys I’ve been really slow in getting this written up. A fewSunday mornings ago we had  a chilly start, the temperature gauge in the car claiming 7 degrees Celsius. Autumn looks to be on its way. At least it was sunny and dry as we packed the car and headed to the Centaura shoot grounds outside Derby.
The nice thing with heading to Centaura is we have the opportunity to run into friends we haven’t seen since moving from the area. It was great to see Jon C, Jim, Chris and others.
The shoot was well attended, resulting in a very full car park by the time we arrived shortly after nine, with most pegs having 4 archers on them. In interested you can check out a past shoot report here.
We would start on peg one a few yards from the main building, so a very short walk out, the only downside being at lunch break we would be at the furthest part of the wood.
Target 1 - paper face ermin

Target 1 – paper face ermin

The course like many others was a mix of 3d and paper faces, 36 targets in total.
We were joined by Trevor, Catherine and Jacob from Hanson, though only Trevor and Jacob were shooting. (Longbow and hunting tackle respectively )
The now infamous polo shot which Centaura are becoming known for returned on target 36 , this time with a 3D owl target. There was the long shot into the quarry this time with a 3D boar, though it’s hard to make out in the photo.

wpid-2015-09-10-08.20.46.jpg.jpeg
Our first shot would be the ermin in a ditch, not a confidence building shot to start with.
Target 8 - a downhill bedded 3D deer

Target 8 – a downhill bedded 3D deer

Another traditional shot they put out is a very short one, 3 feet away. You can see Jacob shooting it.

Very close shot

Very close shot

This was the only one I didn’t like, simply due to the shortness in distance. I think I  would have put it back further and this would be safer, say to about 6 feet as very low poundage junior bows could see the arrow bounce back. I don’t believe there was any problems on the day,with the shoot flowing okay, all the time  with Trevor regaling us with archery stories and believe me he has a few.
Trevor shooting a 3D

Trevor shooting a 3D

Sharon shooting 3D owl between trees

Sharon shooting 3D owl between trees

Lunch break was between 12:30 and 1:30 giving archers ample time to get off the course grab some food and then head back out. Though I think Centaura need to invest in some louder air horns to signal start and lunch breaks.
Didn’t shoot as well in the afternoon and wonder if this was due to it being a  bit slower.

Paper face Racoon in a dip

Paper face Racoon in a dip which is a lot harder than it looks

Overall I think it was was a good shoot with some nicely placed shots like the 3d ram from the top of the hillside.
Long ram off the top of the hillside

Long ram 3D off the top of the hillside

Sharon came away with first in ladies hunting tackle. I managed a placing  in gents afb. Though I didn’t feel I shot very well and still have a long way to go with the flatbow.
Thanks for reading.

Aug 21 2015

Shoot Report – Lyme Valley Archers – August 2015

Lyme Valley Archers field

Lyme Valley Archers field

I’ve been falling behind on writing these shoot reports over the last few weeks so I’m going to try and catch up now starting with Lyme Valley Archers shoot.
Last Sunday we headed north to Lyme Valley shoot grounds outside Stoke on Trent. Due to the extensive road works on the motorway and the 50 mph speed limit  we seemed to take ages to get there arriving to find the field already full of archers’ cars. A clear sign of the shoots popularity. Here is a link to their past shoots.
The good news was that the weather was dry and warm though I’m beginning to think August is less summer and more early autumn this year. As it was there was a slight chill in the shade of the wood. Thankfully it was not raining, Lyme Valley can get very slippery in the wet, since it is as its name suggests, situated in a valley with quite steep sides in places.
The course was a mix of 3d and paper faces with a couple of new 3d targets I don’t recall seeing before. There were 36 targets in total, unlike last time though they were all in the wood and none in the field.
Dan, David and John

Dan, David and John

There were five in our shooting group with David and Dan from Paget de Vasey shooting flatbow and longbow respectively along with John from Forest of Arden shooting flatbow all joining Sharon and I. The group gelled well and it was a really good laugh all the way round the course.
Dan and Sharon

Dan and Sharon

We started on target 30; a down hill 3d bear that was trickier than first looked.  I think we didn’t stop joking and laughing all day . The course only problem we had was when Sharon’s rest broke about 7 targets in and she had to fit a replacement.

Downhill 3D bird

Downhill 3D ptarmigan

Lunch break was between 12:30 – 1:15 after which saw us return to a tricky uphill shot at a 3D turkey. Lyme Valley operates a lunch break where all shooting stops to allow archers safely off the course for lunch. To be fair I think it would be very hard for them to do a shoot through due to the woodland shape being along a long narrow valley.

Archers heading back after lunch break

Archers heading back after lunch break

Over lunch and chatting to others we discovered there had been a problem at the opposite end of the woodland which had stopped archers shooting for a short time but we were unaware of.
The mix of targets and distances was good though I think the crocodile was a little on the far side as you were aiming at its side.
There was a great shot across the stream to a 3D bedded large deer that I completely misread resulting in a third arrow as my first and second landed in the mud in front.

Uphill shot

Uphill shot

I think something that could improve peoples’ enjoyment of the shoot and save on broken arrows is if when the course layers dig out the bank for a shot they put either a boss or thick foam behind. They could camouflage it easily enough with undergrowth etc. The reason I mention this is that both Sharon and I broke the piles off a couple of arrows when we skimmed the top of 3ds and went into the bank.
To be fare the course layers must have worked really hard to get in some of the shots so credit to them for that.

3D goose

3D goose

There were some really nicely framed shots and some good use of up and downhill terrain features. I liked a 3D deer between a fork in a tree which we shot early in the day.
3D deer between the trees

3D deer between the trees

The large grizzly bear up against the tree was another shot which made you think about which angle to take.

3D Grizzly

3D Grizzly

Overall it was a good challenging course with a couple of shots that could have been improved with modification to peg position and consideration of overshoots.

Sharon came away with first in ladies hunting tackle but nothing for me other than a couple of arrows to repair and good memories. Sadly the journey home was even slower due to more traffic and reduced speed limit.
Thanks for reading.
Dixie Leathercraft
Aug 13 2015

Equipment review – custom archery tabs from Dixie Leathercraft

Dixie Leathercraft

Dixie Leathercraft

Dixie Leathercraft is a small business in Leicestershire making a vast array of leather goods.
I first encountered them at the 3d championships this year where they had a large tent selling all kinds of products from quivers to arm braces, pouches to six gun holsters. I ventured into this Aladdins cave looking for a suitable belt pouch to house my Ventolin inhaler. They didn’t have one on show but offered to make me a custom belt pouch for the next day. Which they did and I have used ever since.
A few weeks after the championships a friend was round trying out his new Blackbrook afb and showed me a tab he had commissioned from Dixie. This got me thinking and I contacted Dixie to see if they would be able to make something similar for me.
They produced a couple of designs based on my specifications, one single layer and one double. The double was made large enough for me to mount  an old finger spacer from a worn out tab on.

This is the single thickness tab

This is the single thickness tab

The first design of the double layer worked okay but I felt it needed a slightly larger backing piece to extend to match the facing piece.

Mark 1 tab - needed the backing piece extended

Mark 1 tab – needed the backing piece extended

We also extended the leather covering the forefinger slightly.

Mark 2 tab before having spacer fitted

Mark 2 tab before having spacer fitted

The mark two was produced and I have now used this in earnest shooting the club 40 target course, on practice bosses at home and for a couple of shoots.
The extra length protects the ring finger well and the second layer whilst offering additional protection to the fingers, still allows me to feel the string on my fingers when at anchor.
I know a lot of people may think what’s wrong with the normal ones in the shops and my answer is nothing. I used one for several years along with shooting gloves and there are countless ones on the market. The reason I sought out a custom design was to see if it made a difference to me and I believe it does.
The tab is more comfortable to use than a glove  as I have found the glove in warm weather to be very warm and uncomfortable,  making my hand sweat.  I’ve taken to talc in the inside to make it more comfortable. I also tend to take my glove off between shots on warm days.
The cost has been cheaper than I expected and the service has been fabulous. Dixie Leathercraft are really friendly and helpful. I shoot split fingers or mediterranean lose meaning my first finger is above the arrow nock with the other two below the arrow. For this reason when I’m using a tab I have a finger spacer between the first and middle finger.
Mounting the finger spacer was pretty easy. I used my old tab as a guide initially marking the reverse side of the leather where the tab spacer would be.

Mark 1 below the mark 2. You can see how the backing piece now covers the full tab

Mark 1 below the mark 2. You can see how the backing piece now covers the full tab

The spacer on old tab was attached via two small screws which were easily removed from the worn out tab. I made two small holes in the new tab with a braddle for the screws and a third to allow the elastic strap through. If you have one you might want to use a leather hole punch for the elastic hole as it would make it easier to feed the elastic through.
Close up of the securing screws, the elastic is knotted through a hole in the metal plate

Close up of the securing screws, the elastic is knotted through a hole in the metal plate

The old tab had a metal plate triangular in shape with two holes in one end for the screws and the third I threaded the elastic through tying a knot so it wouldn’t be pulled through.
Once the elastic was fed through the tab I then fed the elastic through the gap between the two screws, screwing them tightly to the spacer then secured the elastic in place.
Elastic threaded through between the 2 screws before they are tightened

Elastic threaded through between the 2 screws before they are tightened

Before securing them I made sure the loop of elastic was the right size to accommodate my middle finger.

Shows the spacer and elastic loop on finger

Shows the spacer and elastic loop on finger

Finished leather tab

Finished leather tab

The extra length of leather can be easily folded over the metal plate .

Finished leather tab showing how the leather can be folded over

Finished leather tab showing how the leather can be folded over

I hope people find this of use . I know there have been a few articles and posts on tabs versus gloves. I think Bow International magazine ran an article on custom tabs and spacers a few issues back.
Thanks for reading.