Early this week Sharon was asked by an archery friend what arrows she thought would be good for her brother. What an easy question to answer … NOT 😉
She asked me and my response was to suggest she found out some more information first
The type of arrow is dependent on numerous factors many of which I’ve covered but in short
- Draw Length
- Bow weight
- Club rules
- Bow Style – compound, recurve, longbow etc
- Purpose – hunting/target/field etc
Shooting an arrow that is not matched to your draw length and poundage can be dangerous as it may snap under the pressure if the wrong poundage, or you might draw it off the arrow rest if too short. Beginners often find their draw length increases as they get more used to shooting, so make sure any arrows allow for this.
Likewise too light an arrow can damage your bow as there is insufficient strength and weight in the arrow to cope with the energy from the limbs, resulting in damaged limbs.
General rule of thumb is the longer the draw length and the heavier the bow draw weight you end up going for stronger arrows ie the numbers higher. This is explained best here, taken from the Easton Arrow site
The four-digit number refers to the outside diameter and wall thickness of the shaft. The first two numbers are the outside diameter in 64ths of an inch. The second two numbers are the wall thickness in thousands of an inch.
For example, a 2514 shaft would be 25/64th of an inch in diameter and .014 of an inch wall thickness. OD and wall thickness are the two variables in controlling spine for aluminum arrows.
Quick point on club rules. Some clubs do not allow archers to use carbon arrows, others ban beginners from using them. Personally I am not a fan of beginners using carbon arrows simply because I prefer them to use alloys. Alloys are easier to find if lost, if they glance off a tree they might be slightly bent but can’t be straightened, they don’t break / shatter leaving carbon shards. This topic is covered in the recent stick and string podcast
For complete beginners I tend to use Easton Neo alloy shafts, they are 1618 and at full length 32 inches. They are great arrows for low poundage bows, up to about 24-26lb at 28″ above that they get a bit whippy.
Another good arrow for a slightly more experienced archer is the Easton Jazz. They range from 14130 to 1916. I tend to find most beginners find the 1816 work well from their first bows that come in about 26lb-30lb.
Here is a link to Easton Arrows selection chart http://www.eastonarchery.com/uploads/files/52_target-sel-chart.pdf this will help work out whats best for your bow.
As the archer progress good alloy arrows are the Easton x7 (think they are 1614 going from memory) which Sharon uses (recurve 38lbs and 26″, yes 26″ not 28″) and work well for the field archery we do. I’ve got some XX75 that are pretty robust too, but I tend to shoot wooden arrows more.
There are loads of really useful sites out there and a wealth of help in local clubs, so do a few searches and if you can try different arrows before you buy. Jordan Sequillion blog site covers this well as do others like Charlies
Please note I have no alliance or connection with any of the shops or manufacturers I mention here, other than being a customer. So I have no vested interest in this other that trying to help an offer my opinion.
I hope this is of interest and if you have any questions drop me a line. Always happy to help if I can. Thanks for reading.