Equipment Review – Bearpaw 3D Steel Screw-On Points

Okay, to go with my literature reviews (which reminds me I need to finish the write-up on the next one) I thought I’d make a few comments on equipment and bits that I use. Please remember these views are personal, feel free to agree or disagree. If you have any experience of using the items mentioned please let me know it would be great to know how they work for other archers.

The first item I’m going to review is not that exciting for most of you. Piles , no not the sort you see the doctor about ūüėČ I’m talking about the sort you fit to the end of your arrows in this case wood arrows. Over the years I have used a variety of different styles and metals including brass and steel.
On a recent trip to Merlin archery I picked up some Bearpaw screw on piles. I had mentioned to Chris I was experiencing a problem with loss of piles in some 3D targets recently and he suggested I try these piles. He also commented that they should self centre well onto the shaft.
They are longer than the type I had used previously (brass 3D points) but still a taper fit.
So how have they worked?
Well I’ve been using them now for a few months and I am very impressed. I’ve not as not had any come off in 3D or foam targets.
They do appear to self centre when fitting to the wood shafts, which saves a lot of time and hassle. I think this is due to the extra length giving a cleaner and straighter fit.
I’ve fitted them to Port Orford Cedar and Sitka spruce 11/32 shafts without any difficulty. I apply them with a small amount of 2 part adhesive to the shaft and then screw them on by hand. No need to use any power tools or pliers, if you need to I’ve found that you can remove them by heating on a gas ring burner and using pair of pliers.
 Bearpaw 3D Steel Screw-On Point Рare available in

  • 11/32 – 100 grains /125 grains
  • 5/16 100¬†grains /70 grains
Bearpaw Screw-On 3D Point¬† are also available in Aluminium in – 5/16 – 40¬†grains though I’ve not used these, so can’t give you any feedback on them.

Hope readers find this of use. Thanks for reading