Tag Archives: feather fletching

Oct 1 2015

Equipment Review – Timber Creek Wooden arrows

Timber Creek Arrows

Timber Creek Arrows

I recently picked up some Timber Creek wood arrows from Merlin Archery care of Jim Grizzly Kent  and thought it worth putting a review together.
First impressions are positive.
The shafts are 11/32 with a 4 inch feather shield fletchings and black nocks. Made from Siberian spruce, these were spined as 50/55 as I wanted to use them with my flatbow.
The varnish finish is good being smooth and flawless over the entire length of the arrow.
Only thing I don’t like is the nock colour. Whilst they look great, fit well on the string, they are black which makes them very hard to see on longer targets. I like the thread binding at the front of the fletching as this can protect the tip of the fletching.
The shafts are straight and with the clear varnish you can see the quality of the wood grain.
Close up

Close up of fletching and nock

Having weighed them the six arrows come in 30 grains variance which is pretty impressive for unmatched out of box.
The piles are 100 grain field point which will be fine for most but I prefer an 80 grain.

100 grain piles

100 grain piles

Out of the box they are 32 inches in length and come pre – piled and ready to shoot.  Only thing I’ve noticed is the piles on two are very slightly proud of shafts, probably due to the shafts being slightly less than an 11/32. So if shooting a bag boss they can snag on the fabric. In fairness this is not an uncommon problem with wooden shafts and one I’ve encountered when making my own.Initial goes
I’ve tried shooting them at full length and they fly ok at about 12 -15 yards but really need to cut them down to my draw length. At 20-25 yards I was noticing the difference of pile weight and length. My normal arrows are fitted 80grain points so will probably fit 80 grain piles for true comparison.

Further testing 
Having now cut them to my draw length and fitted 80grain points I can add a couple of extra observations.
Being spruce the wood feathers or crumbles a little when tapering them. I found the same with other spruce and to be fair these were better quality.
Removing the old piles was easy using a gas ring to heat them for about 10 seconds and then unscrewing with a pair of pliers. Not sure if the 100 grain field point will blunt if a wayward arrow were to hit a rock, but this is the same for other pile designs and the reason I prefer steel to brass.
Having shot them they fly very slightly high and to the left but only slightly which makes me think slightly stiff.

Grouping at 15 yards

Grouping at 15 yards

Flight wise, they are very good and I’ve shot them a couple of hundred times.
I’ve not missed so badly as to bounce them off a tree yet so not sure of durability but am sure I will find out soon.

UPDATE – First casualty and note to self. If you shoot your own arrow it breaks. Managed to shoot the pile off one.  Yes pile, not nock, that takes skills.

First casulaty

First casulaty of the testing

 Those interested in the Timber Creek range of bows might like to know i recently picked up a Timber Creek Cobra and hope to write a review in the near future.
 If you don’t have the time or expertise to make your own arrows I think they are a good buy being good quality components assembled well. Priced at just under £5 each it’s not bad value. (http://www.merlinarchery.co.uk/timer-creek-wooden-arrows-basic.html)

Overall a 8.5 to 9/10 due to the nock colour.

Thanks for reading

Apr 16 2014

Wooden Arrow survey

Calling all readers for some help with a bit of archery related research.

Fellow NFAS archer Andy is doing a project to find out what materials and options people use for wooden arrows. He has created a simple 10 question survey and is trying to get as many people as possible to complete it.

So if you shoot wooden arrows could help him out.

https://www.surveymonkey.com/s/G7BNTQ5

For those of you concerned about storage of personal information Andy has stated

“It’s all anonymous, so no personal data is collected and there is no sign up or emails address needed.”

Thanks for reading.

Jan 1 2014

Equipment Review – Bohning fletching tape

With the stormy weather hitting the UK at present, many archers are retreating to the indoor ranges or their making and doing rooms and sheds, fletching arrows and sorting gear for the new season. It’s been not so much of a white Christmas and New Year as a very, very wet one.

Here is hoping everyone is safe, warm and dry.

I thought I might take this opportunity to post my findings on using Bohning fletching tape. Been a while since I’ve written a review so here goes.

Just to make this clear from the outset. These are my views and opinions. I have no commercial interest in these products I review or the companies.

Double sided tape

Bohning Double sided tape

For years I have been using fletching glue to attach my feather fletching to the wood shafts. HMG has been my glue of choice. The only issue I’ve had is the time it takes for the adhesive to cure which is 15-20 minutes depending on air temperature.

For plastic vanes I’ve used simple bostic glue from local hardware shop which seems to work well on Sharon’s aluminium eclipse arrows.

At a shoot last year I was mentioning this and Bob one of our old club members from Black Arrow mentioned he used double sided fletching tape for all of his arrows and had never had any problems. Bob shoots longbow for both field and roving so his arrows can take some abuse. No offence Bob if you are reading this.

Initially I found applying the tape a little fiddly. Not so much when taking it off the roll and applying to the feather, but when trying to take the second covering layer off the tape when applying the fletching to the arrow shaft, but you get used to it.

Make sure you have aligned the fletching right as the tape adheres fast so you don’t have the time to re align if you make a mistake.

Quick tip. Ensure the shaft is dry and free from any dust which would cause poor adhesion. I don’t oil or varnish the shafts prior to fletching them.

Using the tape saves a lot of time as I found it quick and easy to use once you got the hang of it. I was able to fletch half dozen arrows in 15 minutes a significant time saving as it used to take 45-55 minutes using the glue to fletch one arrow.

Allow a little more at each end

Allow a little more at each end to make it easier to apply.

Leave a little extra at the front and rear of the fletching as it makes it easier to remove the second side of the tape and easier to apply the fletching to the shaft.

Extra length at front

Extra length at front

I was concerned the tape might come off in the rain but so far so good. I’ve been using the arrows for a little over six months and they seem okay.

My other concern was if the fletching might peel off the shaft, but this hasn’t happened either. I don’t know if this might be different if you varnished the wood first.

They have stood up to all the normal abuse I can throw at them, from being soaked in the rain, to encounters with trees and other vegetation. I’ve also used the tape for a new set of wooden arrows for Sharon and they seem to eb working well for her too.

Not sure how well it would work on plastic fletching but I am thinking of testing this shortly so it might be an update in near future.

The tape is available from most good archery shops, I got mine from Merlin in Loughborough. (http://www.merlinarchery.co.uk/bohning-feather-fletching-tape.html) I’ve used less than half the roll so far and produced a couple of dozen arrows so its pretty good value for money at just under £7 a roll.

So in short my verdict is thumbs up for Bohning tape, a good product that can save you a lot of time. 9/10 (could be higher if I had chance to try it on shafts other than wood)

Let me know if you have any experiences with this or anything else.

Happy New Year and as always thanks for reading.